Crimp-on ProgramHose Ends By Russell Performance |
||||||
 |
||||||
| Russell's Full Flow hose ends have been the choice of racing professionals for more than 30 years. They feature a unique tapered design for easy assembly and are mandrel bent for superior flow. They are also designed with a 37° angled sealing surface that guarantees a positive anti-leak seal and will not require the use of a sealing compound or PTFE tape. We've expanded our line of adapters to provide the widest range of coverage for whatever plumbing problem you need to solve. | ||||||
| CRIMP-ON HOSE ENDS
ProClassic Crimp-On hose ends make custom hose fabrication easy. Simply cut the hose, push together the hose and fitting and crimp! Their lightweight collar design is engineered by size for precise compression ensuring proper end attachment with Russell manual crimper and appropriate crimper die. Replacement collars are available in the event you want to re-use the hose end on a different assembly. They are available in -4 through -12 sizes and are packaged complete with collar. Crimper and dies sold separately. |
 |
|||||
| FULL FLOW HOSE ENDS
Russell Full Flow Hose Ends are made from lightweight aluminum and are completely reusable. They feature a unique taper design ensuring easy assembly and also offer 37° angled sealing surface which guarantees a positive anti-leak seal. These Full Flow Hose Ends accepts a wide variety of lightweight aluminum AN style adapter and carburetor fittings. Lastly, these Russell Fittings are interchangeable with many other manufacturers' hose ends. |
 |
|||||
| FULL FLOW SWIVEL HOSE ENDS
Russell's Full Flow Swivel Hose Ends swivel 360° to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing for superior flow and are available in three different finishes. |
 |
|||||
| POWERFLEX POWER STEERING HOSE ENDS
Powerflex Power Steering Hose Ends with Endura finish are available in three different AN sizes (-6, -8 and -10). These hose ends are suitable for high pressure power steering use and are corrosion resistant. |
 |
|||||
| SPECIALTY SWIVEL AND FORGED HOSE ENDS
Russell Specialty Hose Ends, are the perfect answer for several of your specialty plumbing needs. The Full Flow Swivel Pipe Thread Hose Ends allows the connection of fuel and oil lines with out any additional adapters simplifying the hose assembly. When plumbing your dry sump system by utilizing the Full Flow Swivel Dry Sump Hose End the additional adapters are eliminated saving time and money. The Full Flow Forged Swivel Hose Ends are manufactured from a superior strength and durable forged aluminum for the tight and unique tight engine compartment. |
 |
|||||
| TUBE SEAL HOSE ENDS
Russell Tube Seal Hose Ends are designed to add that finishing hose end appearance with the ease of installation of a hose clamp. These tube seals are available in sizes to fit from 1/4" vacuum hose to 3/4" heater hose, and are offered in four choices of colors: red, blue, chrome and Black. |
 |
|||||
| TWIST-LOK HOSE ENDS
Russell Twist-Lok Hose ends utilizes Barb Technology. These hose ends are Constructed of lightweight aluminum and are 40% lighter than conventional hose ends. Twist-Lok hose ends are easy to assemble and work with any Russell AN adapter or carburetor fittings. Russell Twist-Lok Hose ends are available in red/blue anodize. |
 |
|||||
|
||||||
WARNING: ALL products on this page can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
-
-
- About Edelbrock, LLC
-
-
